19-6556; rev 0; 1/13 general description the MAX77301 is a jeita-compliant* lithium-ion linear battery charger that operates from a usb port, a dedi - cated charger, or universal adapter. the ic provides automatic adapter-type detection and enumeration with a usb host or hub. the ic integrates independent bat- tery charge switch, current sense circuit, mosfet pass elements, thermal regulation circuitry, and eliminates the external reverse-blocking schottky diode to create the simplest and smallest usb-compliant charging solution. the ic includes automated detection of charge adapter type, making it possible to distinguish usb 2.0 device, usb charger, dedicated charger devices as well as standard input adapters. see table 2. when enumeration is enabled, the ic automatically negotiates with a usb host, making it possible to achieve the highest-charging current available from a usb 2.0 device or usb charger without processor intervention. the adapter type detec - tion is compliant with usb 2.0 as well as battery charging specification revision 1.1. the ic controls the charging sequence for single-cell li+ batteries from battery detection, prequalification, fast charge, top-off, and charge termination. charging is controlled using constant current, constant voltage and constant die-temperature (cccvctj) regulation for safe operation under all conditions. the ic is also compliant with jeita battery charging requirements. the smart power selector feature makes the best use of limited usb or adapter power. battery charge current is set independent of the input current limit. power not used by the system charges the battery. the battery assists the input source when needed. system voltage is maintained by allowing the application to operate with- out a battery, a discharged battery, or a dead battery. automatic input selection switches the system from bat - tery to external power. the i 2 c interface provides full programmability of battery charge characteristics, input current limit, and protec - tion features. this provides flexibility for use with a wide range of adapter and battery sizes. other features include undervoltage lockout (uvlo), overvoltage protection (ovp), charge status flag, charge fault flag, input power-ok monitor, battery detection, jeita-compliant charging, charge timer, 3.3v/10ma aux - iliary output, and an external power-on switch. benefits and features s enables charging from a usb port s automatic detection of adapter type s input current up to 1500ma and charging current up to 900ma s enumeration without processor intervention s supports usb low-speed and full-speed s compliant with usb 2.0 specification and battery charging specification (revision 1.1) s compliant with next generation low-voltage li-ion battery profiles s input overvoltage protection up to 16v s smart power selector? allows power path operation with discharged or no battery s battery detection including packs with open protectors s thermal regulation prevents overheating s led indicator for charge done, precharge, and time/temperature error s serial (400khz) i 2 c-compatible interface s 6a (typ) shutdown current s 2.44mm x 2.44mm, 25-bump wlp package applications bluetooth headsets, pdas, and mp3 players other portable devices ordering information appears at end of data sheet. for related parts and recommended products to use with this part, refer to www.maximintegrated.com/MAX77301.related. smart power selector is a trademark of maxim integrated products, inc. simplified operating circuit *u.s. patent # 6,507,172. v bus i 2 c d+ d- bus batt sys charge and sys load switch system load control logic usb interface 1-cell li-ion osc MAX77301 4.0v to 6.6v (+16v ovp) MAX77301 jeita-compliant, li+ charger with smart power selector, automatic detection, and usb enumeration evaluation kit available for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxims website at www.maximintegrated.com. abridged data sheet
|
